[Tinyos-help] about mit510's Reset Button

[Yu Qun]

Thank you so much for your help.
Maggie

On Wed, Jun 11, 2008 at 4:36 AM, Siirtola Harri <Harri.Siirtola at vtt.fi>
wrote:

>  It resets the mote attached to MIB510. Programming failures don't occur
> because of MIB510 state, it's always ok if not electrically broken. The most
> common reasons are badly attached mote, TX switch in the wrong position and
> wrong programming command format.
>
> Regards,
>
>     Harri
>
>  ------------------------------
> *From:* tinyos-help-bounces at millennium.berkeley.edu [mailto:
> tinyos-help-bounces at millennium.berkeley.edu] *On Behalf Of *Yu Qun
> *Sent:* Wednesday, June 11, 2008 2:45 AM
> *To:* tinyos-help at millennium.berkeley.edu
> *Subject:* [Tinyos-help] about mit510's Reset Button
>
>
> hi everyone:
>
> I want to ask a question,  what is the function of Reset Button on MIB510?
> If I upload some coding on the programming board such as mib50 not
> successfully, can I use the "reset button" to get the initial state of
> MIB510?
> Thanks!
>
> Sincerely;
> Maggie
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.millennium.berkeley.edu/pipermail/tinyos-help/attachments/20080611/4e3df345/attachment.htm