[Tinyos-help] Help to fix the flash error at address

[Underléa Cabreira Corrêa]

Dear Michael,

Thank you very, very, very much!! It works very well :)
I did not have the Makelocal, so I had to created a Makelocal file on
/opt/tinyos_2x/support/make to add your suggestions informations ... and my
Blink app was perfectly uploaded ;)

Cheers
Lea


On Fri, Jun 27, 2008 at 1:35 PM, Michael Schippling <schip at santafe.edu>
wrote:

> You are using the wrong syntax to set the programmer options.
> The "uisp -dprog=dapa ..." line indicates that it's trying to use
> the old parallel connection programmer. I always forget how to do
> it on the command line so I set this in my Makelocal file:
>
>    DEFAULT_PROGRAM=mib510
>    MIB510=COM5
>
> where you might use /dev/ttyS0
>
> MS
>
>
> Underléa Cabreira Corrêa wrote:
>
>> Dear all,
>>
>> I 'm just getting start with TinyOS and Mica Motes platform, but I already
>> have got a problem in the first lesson from tutorial.
>> I m using TinyOS 2.x in a Linux Ubunto machine. I have followed the
>> installation instruction from
>> http://www.tinyos.net/tinyos-2.x/doc/html/install-tinyos.html. I have
>> tested my environment with $ tos-check-env and I just have got a warning
>> about the GraphViz version ...
>> My problem is : I can t install the Blink app on Mica2. Every time I have
>> tried I have got the following flash error address :(
>>
>> root at besouro:/opt/tinyos-2.x/apps/Blink# make mica2 install, 1 MIB510,
>> /dev/ttyS0
>> mkdir -p build/mica2
>>    compiling BlinkAppC to a mica2 binary
>> ncc -o build/mica2/main.exe -Os -finline-limit=100000 -Wall -Wshadow
>> -Wnesc-all -target=mica2 -fnesc-cfile=build/mica2/app.c -board=micasb
>> -DIDENT_APPNAME=\"BlinkAppC\" -DIDENT_USERNAME=\"root\"
>> -DIDENT_HOSTNAME=\"besouro\" -DIDENT_USERHASH=0xcc8c50dfL
>> -DIDENT_TIMESTAMP=0x48641421L -DIDENT_UIDHASH=0x39bb344dL -fnesc-dump=wiring
>> -fnesc-dump='interfaces(!abstract())' -fnesc-dump='referenced(interfacedefs,
>> components)' -fnesc-dumpfile=build/mica2/wiring-check.xml BlinkAppC.nc -lm
>>    compiled BlinkAppC to build/mica2/main.exe
>>            7130 bytes in ROM
>>              52 bytes in RAM
>> avr-objcopy --output-target=srec build/mica2/main.exe
>> build/mica2/main.srec
>> avr-objcopy --output-target=ihex build/mica2/main.exe
>> build/mica2/main.ihex
>>    writing TOS image
>> cp build/mica2/main.srec build/mica2/main.srec.out
>>    installing mica2 binary with dapa
>> uisp -dprog=dapa --wr_fuse_h=0xd9 -dpart=ATmega128 --wr_fuse_e=ff  --erase
>> pulse
>> Atmel AVR ATmega128 is found.
>> Erasing device ...
>> pulse
>> Reinitializing device
>> Atmel AVR ATmega128 is found.
>>
>> Fuse High Byte set to 0xd9
>>
>> Fuse Extended Byte set to 0xff
>> sleep 1        uisp -dprog=dapa --wr_fuse_h=0xd9 -dpart=ATmega128
>> --wr_fuse_e=ff  --upload if=build/mica2/main.srec.out
>> pulse
>> Atmel AVR ATmega128 is found.
>> Uploading: flash
>>
>> Fuse High Byte set to 0xd9
>>
>> Fuse Extended Byte set to 0xff
>> sleep 1        uisp -dprog=dapa --wr_fuse_h=0xd9 -dpart=ATmega128
>> --wr_fuse_e=ff  --verify if=build/mica2/main.srec.out
>> pulse
>> Atmel AVR ATmega128 is found.
>> Verifying: flash
>> flash error at address 0x0: file=0x0c, mem=0xff
>> flash error at address 0x1: file=0x94, mem=0xff
>> ...
>> flash error at address 0x2: file=0x49, mem=0xff
>> I have tried the suggestions that I found on this list but no one have
>> fixed my problem :(
>> Any suggestion ?
>> Thank you so much!!
>>
>> --
>> Léa
>>
>> <http://www.das.ufsc.br/%7Eunderlea/>
>>
>>
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> Tinyos-help mailing list
>> Tinyos-help at millennium.berkeley.edu
>> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
>>
>


-- 
Underléa Cabreira Corrêa, PhD student - underlea at das.ufsc.br
Department of Automation and Systems
Federal University of Santa Catarina
Florianópolis, SC - Brazil
phone: +55 48 84296933
http://www.das.ufsc.br/~underlea/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.millennium.berkeley.edu/pipermail/tinyos-help/attachments/20080630/7f44b931/attachment.htm