[Tinyos-help] avrdude problem

[Michael Schippling]

See my just previous answer to "hello". You are probably not specifying
the right programmer device.
MS


Hristo Bojkov wrote:
> Hello,
> I need assistance with avrdude. This is my first experience with the avr 
> cpu's and related toolchain.
> I am trying to upload basestation to a mote with command:
> $ avrdude -c dapa -U hfuse:w:0xd9:m -pm1281 -U efuse:w:0xff:m 
> -Cc:/cygwin/etc/avrdude/avrdude.conf -U 
> flash:w:build/iris/main.srec.out-0:a -P com26
> 
> The result from execution is:
> avrdude.exe: can't open device "com26"
> 
> avrdude.exe: failed to open parallel port "com26"
> 
> I have this version of avrdude:
> $ avrdude -v
> 
> avrdude.exe: Version 5.4, compiled on Nov  5 2007 at 20:32:26
>             Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
> 
>             System wide configuration file is "c:\WinAVR\bin\avrdude.conf"
> 
> avrdude.exe: no programmer has been specified on the command line or the 
> config file
>             Specify a programmer using the -c option and try again
> 
> Any help is more than welcome
> 
> 
> Hristo Bojkov
> Senior Embedded Designer
> IdXS, Bulgaria
> 
> 
> .......TOS environment....................................
> OS  : WinXP + cygwin
> TOS: 2.0.2
> Dev : tmote sky
> Java: jdk1.5.0_06
> 
> 
> _______________________________________________
> Tinyos-help mailing list
> Tinyos-help at millennium.berkeley.edu
> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help

-- 
Platform: WinXP/Cygwin
TinyOS version: 1.x, Boomerang
Programmer: MIB510
Device(s): Mica2, MicaZ, Tmote
Sensor board: homebrew