[Tinyos-help] writing problem with micaz

[Giri Baleri]

Few things to check/try:
- Make sure the programming port on MIB520 is in fact COM3 (lower of the 2 COM ports)
- Make sure that the Mote is seated firmly into the 51-pin connector of the MIB520
- Make sure that no other application is using COM3.
- Try "make micaz install mib520,/dev/ttyS2" or "make micaz install mib510,/dev/ttyS2" instead.
 
Good luck,
Giri
 

________________________________

From: tinyos-help-bounces at millennium.berkeley.edu [mailto:tinyos-help-bounces at millennium.berkeley.edu] On Behalf Of ilpadrino corleone
Sent: Monday, March 17, 2008 10:05 AM
To: tinyos-help at millennium.berkeley.edu
Subject: [Tinyos-help] writing problem with micaz


Hello,
I have installed the crossbow software (cygwin, moteconfig, moteview, ...) on windows xp. When I try to install MyApp (tutorials/lesson1) into the mote I will get it compiled but it won't upload. 

make micaz install mib520,com3
{........}
uisp -dprog=mib520 -dserial=com3 --wr_fuse_h=0xd9 -dpart=ATmega128 --wr_fuse_e=ff --erase --upload if=build/micaz/main.srec.out

and after that line cygwin will stay silent. I also tried to program it with MoteConfig without any results.

I have micaz motes, with a mib520 board and msp400. 

If anyone could give me a hint of what's going on I'd be grateful.

Thanks in advance,

David 



________________________________

Todo ruedas: información práctica y todo el glamour del mundo del motor. MSN Estilo y Tendencias <http://estilo.es.msn.com/>  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.millennium.berkeley.edu/pipermail/tinyos-help/attachments/20080317/a1ef08d5/attachment.html