[Tinyos-help] CntToLedsAndRfm and RfmToLeds not working

[Giri Baleri]

If your transmitter Mote (programmed with CntToLedsAndRfm) blinks like a
counter, but the receiver Mote (programmed with RfmToLeds) doesn't
emulate the LED pattern, it is most likely due to the RF band/channel
that you forgot to specify. If you were using contrib/xbow apps, these
are defined in MakeXbowlocal file. I believe you should be able to
create similar Makelocal file for your app.
 
Good luck,
Giri

________________________________

From: tinyos-help-bounces at millennium.berkeley.edu
[mailto:tinyos-help-bounces at millennium.berkeley.edu] On Behalf Of
Prashant Pillai
Sent: Monday, March 24, 2008 1:55 AM
To: tinyos-help at millennium.berkeley.edu
Subject: [Tinyos-help] CntToLedsAndRfm and RfmToLeds not working



Hi All,
 
I am having some probelms with radio comms. for the Mica2 mote. I have
installed CntToLedsAndRfm in Mote 1 and RfmToLeds on Mote 2, but on
switching them on, the Mote 2 does not show anything on the leds. I have
also reversed the programs and tried with other sets of motes.
Interesting the program works for my MICAZ motes. The problem is only
with the MICA2 ones that I have. I am not using the xbow contributions
at the moment, so the CntToLedsAndRfm and the RfmToLeds are the ones
present in the tinyos apps. is it because of this? I remember earlier
when I used to use the xbow contribs on another old machine there was a
MakeXbowLocal file. I tried copyin that over to my new machine but
starting getting several errors. 
 
Can someone please help me with this? 
 
Thanking you in advance.
 
Regards
Prashant Pillai
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.millennium.berkeley.edu/pipermail/tinyos-help/attachments/20080324/a1c59b3d/attachment.html