[Tinyos-help] Cricket and MIB510 setup

[Giri Baleri]

Hi Arif,

MoteView and MoteWorks do not support Cricket platform.
Since Cricket has its own serial port, it doesn't need a MIB510 board to
communicate with the PC. It can be plugged directly into a PC's serial
port. MIB510 is typically used to re-program the Cricket. You can find
more details at MIT's Cricket website below.
http://nms.lcs.mit.edu/projects/cricket/

I hope that helps,
Giri

-----Original Message-----
From: tinyos-help-bounces at millennium.berkeley.edu
[mailto:tinyos-help-bounces at millennium.berkeley.edu] On Behalf Of
a_vali at encs.concordia.ca
Sent: Monday, March 24, 2008 4:51 PM
To: tinyos-help at millennium.berkeley.edu
Subject: [Tinyos-help] Cricket and MIB510 setup

Hi everyone,

I am working on WSN Cricket(MTS450) Platform and wanted to know how can
Crickets(MTS450) communicate with the Serial Board(MIB510) which will
act as gateway to collect/receive data from Cricket(MTS450) sensor nodes
and report it to desired application. I read manauls on
MoteWorks/Moteview  and other documentation from Crossbow but i didnt
find any specific solution to this problem and hoping that you can
assist me about any solution to this problem, appreciate your reply
soon.

Arif


_______________________________________________
Tinyos-help mailing list
Tinyos-help at millennium.berkeley.edu
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help