[Tinyos-help] Problem with xmeshbase

[Giri Baleri]

Few questions:
- Which PC interface board board do you have? (MIB510, MIB520, MIB600 etc).
- What node ID did you assign the base station Mote with?
- When you issued the "make mica2 install....." command, what was the output?
 
Regards,
Giri

________________________________

From: tinyos-help-bounces at millennium.berkeley.edu [mailto:tinyos-help-bounces at millennium.berkeley.edu] On Behalf Of ??
Sent: Sunday, May 04, 2008 6:53 PM
To: tinyos-help at millennium.berkeley.edu
Subject: [Tinyos-help] Problem with xmeshbase


Hi, I am trying to compile xmeshbase in the directory of "<moteworks>/apps/xmesh/xmeshbase" for mica2, but it doesn't work on the mote. There are no heartbeats and mote data sent to com port. I followed the instructions of xmesh user manual. Moteworks 2.0f is installed and mib 510 is used as the programmer board.
Did I do something wrong? Or the code isn't correct?
 
Thanks!
 
LIU Yong


________________________________

轻松把Hotmail下载到本地，试试 Windows Live Mail。 立即尝试！ <http://get.live.com/wl/all>  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.millennium.berkeley.edu/pipermail/tinyos-help/attachments/20080505/d21fb0fd/attachment.htm