[Tinyos-help] How to configure MIB 600 for SerialForwarder(TinyOS 2.x) to get packets at MIB600 with Micaz?

[Seungweon Park]

Hello Folks,

I'm using 2 MIB 600s and each has Micaz. One of them sends a packet via air,
and the other one receives the packet. I'd like to see the packet info.
throughout TinyOS(Listen or SerialForwarder) in same network with MIB 600s.
When I test this with Serial Board(MIB510) with option
(serial@/dev/ttyUSB1:57600)
at SF and Listen, it works fine which means Listen shows the packet
information. But not In MIB 600 with
option(network at xxx.xxx.xxx.xxx<https://webmail.pdx.edu/imp/message.php?index=5273#>:port).
Maybe I misunderstood or have a fault. I coulnd't find any manual for
configuration of MIB 600. So could you tell me how to see those packets from
MIB 600 using TinyOS? Do I need to change some settings? Thank you.
---
Seungweon
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.millennium.berkeley.edu/pipermail/tinyos-help/attachments/20081103/b3919298/attachment.htm