[Tinyos-help] the problem of installing the mib520cb 's driver

[guoyuehua.cool]

 thanks for your reply. after connecting the mib520cb, when i execute "dmesg | grep tty",the result is as following:
 serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

 so i guess i can use "make micaz install 20 /dev/ttyS0" for installing the application in the mote. the error is as following:
    cp build/micaz/main.srec build/micaz/main.srec.out
    installing micaz binary using dapa
    uisp -dprog=dapa                      --wr_fuse_h=0xd9 -dpart=ATmega128  --wr_fuse_e=ff   --erase    --upload if=build/micaz/main.srec.out --verify
    /dev/parport0: No such file or directory
    Failed to open ppdev.
    make: *** [program] Error 2
 I am wondering if "make micaz install 20 /dev/ttyS0" is wrong ,or i have to finish other configuration before installing the application. has anybody seen these problem and known how to solve the problem ?  thanks for your help.
   best wishes

                                                                                          jackg
                                                                                          2008,11,6                                                                                  

 

在2008-11-06，"Janos Sallai" <sallai at isis.vanderbilt.edu> 写道：
The driver should be included in kernel 2.6.16. Check dmesg before and after connecting the programming board to see if the driver module has been loaded. If yes, you should be able to see and use /dev/ttyUSB0 and /dev/ttyUSB1.

Janos


2008/11/5 guoyuehua.cool <guoyuehua.cool at 163.com>

 
 hi:

   firstly,thanks for your reply.as the http://www.ftdichip.com/Drivers/VCP.htm website,i has downloaded the linux  version of Virtual COM port (VCP) drivers.when i execute "make" for generating the module.the error is as following:
   error: /lib/modules/2.6.16/build/include/linux/modversions.h: No such file or directory. 

    i guess my kernel version is wrong.In the readme said"it is adapted from the 2.4.32 kernel to support both the 2232c and 232r chip".but the 2.4.32 do not support ipv6.In my project,the kernel must support it.
   our programming board is mib520cb,i do not know which FT** chip can match our programming board.so which kernel version i can use for installing vcp drivers.thanks in advance. i know that my problem is a littele confusion and stupid.but it is very important for me.has anybody installed the mib520cb 's driver ? 
     best wishes:)

                                                                      jackg
                                                                   2008,11,5 



[广告] 凯旋珠联"利"合分期付款优惠活动进行中
_______________________________________________
Tinyos-help mailing list
Tinyos-help at millennium.berkeley.edu
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help


-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.millennium.berkeley.edu/pipermail/tinyos-help/attachments/20081106/6b2e8ebe/attachment.htm