[Tinyos-help] xubuntos and mib510 programmer

[Janos Sallai]

Do you see any drivers loading after you plug in the usb-to-serial converter
(type dmesg before and after plugging it in and compare the outputs)? Is
/dev/ttyUSB0 created? Does "make mica2 install.1 mib510,/dev/ttyUSB0" work?

Janos

On Thu, Nov 6, 2008 at 12:39 PM, Vinai Sundaram <vinaisundaram at gmail.com>wrote:

> Hi ,
>
> I have Xubuntos installed on my machine and I boot into it. I am able to
> program telosb motes with it. However, I am unable to program mica2 motes
> with MIB510 programmer as my usb to serial cable is not detected by motelist
> command. When I program the motes, I get "flash address ...not found error".
> I tried RadioShack's gigawire as well as Keyspan's USA-19HS  usb to serial
> adapter cable. These cables come with a driver for windows but not linux
> (ubuntu). I am wondering if someone is aware of Xubuntos usb to serial
> driver. Thanks.
>
> Vinai
>
> _______________________________________________
> Tinyos-help mailing list
> Tinyos-help at millennium.berkeley.edu
> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.millennium.berkeley.edu/pipermail/tinyos-help/attachments/20081106/a1e3b752/attachment.htm