[Tinyos-help] xubuntos and mib510 programmer

[Vinai Sundaram]

Thanks for the quick replies. Well, I rebooted the system for some other
reason and it seem to have done the trick. Now, I am able to program with
MIB510 programmer with KeySpan USA -19HS usb to serial adapter cable.

Thanks!
Vinai.

On Thu, Nov 6, 2008 at 2:14 PM, Janos Sallai <sallai at isis.vanderbilt.edu>wrote:

> Do you see any drivers loading after you plug in the usb-to-serial
> converter (type dmesg before and after plugging it in and compare the
> outputs)? Is /dev/ttyUSB0 created? Does "make mica2 install.1
> mib510,/dev/ttyUSB0" work?
>
> Janos
>
> On Thu, Nov 6, 2008 at 12:39 PM, Vinai Sundaram <vinaisundaram at gmail.com>wrote:
>
>> Hi ,
>>
>> I have Xubuntos installed on my machine and I boot into it. I am able to
>> program telosb motes with it. However, I am unable to program mica2 motes
>> with MIB510 programmer as my usb to serial cable is not detected by motelist
>> command. When I program the motes, I get "flash address ...not found error".
>> I tried RadioShack's gigawire as well as Keyspan's USA-19HS  usb to serial
>> adapter cable. These cables come with a driver for windows but not linux
>> (ubuntu). I am wondering if someone is aware of Xubuntos usb to serial
>> driver. Thanks.
>>
>> Vinai
>>
>> _______________________________________________
>> Tinyos-help mailing list
>> Tinyos-help at millennium.berkeley.edu
>> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.millennium.berkeley.edu/pipermail/tinyos-help/attachments/20081106/c4ea98f6/attachment.htm