[Tinyos-help] Using the ATAVRRZ200 with the IRIS platform

[Andrey Gursky]

Hi Jürgen,

These links are the first on the official atmel's ATAVRRZ200 web page:

http://www.atmel.com/dyn/resources/prod_documents/ATAVRRZ200_DemonstrationKit.zip
(and the appropriately doc:
http://www.atmel.com/dyn/resources/prod_documents/doc5183.pdf)

The download speed is very poorly, so I haven't yet looked at this. But
it should be that what is needed.

Best wishes,
Andrey



Jürgen wrote:
> Thank you for your quick answer. Where to find the wirings? I just
> searched through the atmel homepage and the documents on it, but didn't
> find something useful. Creating a new platform is described in TEP 131,
> am i right? Thank you.
> 
> greets
> 
>> Hi Jurgen,
>>
>> I am sorry, but you need to check on the scematics if the two system
>> has identical wirings or not. You should create a differetnt platform
>> and build it on top of the iris platform.
>>
>> Miklos
>>
>> On Tue, Sep 30, 2008 at 3:56 PM, Jürgen Broder <juergen_broder at gmx.at> wrote:
>>   
>>> Hello everybody!
>>>
>>> I have loaded the Blink app onto my ATAVRRZ200 motes (AtMega 1281 /
>>> rf230 zigbee), but the leds won't blink. Is it possible that the
>>> Port-/Pinmapping of the IRIS platform doesn't fit my motes? Is there a
>>> way to alter or configure it? Or do you know any other reasons why the
>>> leds don't blink? Thank you!
>>>
>>> Greets,
>>> Jürgen
>>> _______________________________________________
>>> Tinyos-help mailing list
>>> Tinyos-help at millennium.berkeley.edu
>>> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
>>>
>>>     
>>
>>   
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> Tinyos-help mailing list
> Tinyos-help at millennium.berkeley.edu
> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help