[Tinyos-help] How to let IRIS and MICAZ talk to each other

[Miklos Maroti]

Hi Li,

I think other wireless devices are also using that channel (e.g.
WiFi), and I also have experienced this. I would recommend to change
the channel of the micaz. Use CC2420_DEF_CHANNEL or something like
that.

Miklos

On Fri, Oct 3, 2008 at 7:49 AM, Li, Zhen Li <zhen.li at okstate.edu> wrote:
>
> Hi Miklos
>
> Thank you. I set the IRIS motes channel to be the same as the micaz's and they could talk with each other. However, when the IRIS's motes are using the micaz's channel, it seems that the communication quality was decreased. I made a test with one IRIS mote sending packets and the other one running a BaseStation. It turnned out that some packets will lost. After I changed the IRIS's motes channel to the orginal one, there's no problem. Why? The payload is 22 bytes.
>
> Zhen Li
> ________________________________________
> From: mmaroti at gmail.com [mmaroti at gmail.com] On Behalf Of Miklos Maroti [mmaroti at math.u-szeged.hu]
> Sent: Thursday, October 02, 2008 10:34 AM
> To: Li, Zhen Li
> Cc: Tinyos-Help
> Subject: Re: [Tinyos-help] How to let IRIS and MICAZ talk to each other
>
> Change the default channels for the two platform. RF230_DEF_CHANNEL
> and CC2420_DEF_CHANNEL or something like that. Miklos
>
> On Thu, Oct 2, 2008 at 5:26 PM, Li, Zhen Li <zhen.li at okstate.edu> wrote:
>> Hi
>>
>> I have some micaz and iris motes on hand and I want them to talk to each
>> other. Right now I found if only using the default settings, IRIS can only
>> talk to IRIS and so do Micaz. This should be possible since when I was using
>> Moteworks, these 2 kinds can communicate with each other. So in Tinyos 2.1,
>> how can I realize this?
>>
>> Thanks!
>>
>> Zhen Li
>> _______________________________________________
>> Tinyos-help mailing list
>> Tinyos-help at millennium.berkeley.edu
>> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
>>
>