[Tinyos-help] Using the ATAVRRZ200 with the IRIS platform

[Jürgen]

Thank you very much! Finally i got it.
 
Best regards,
Jürgen
> Hi Jürgen!
>
> Ok, I've downloaded the zip.
> Here are they: PE2, PE3, PE4. In the schematics they are noted to be all
> red!??
>
> The screenshot is attached.
>
> Best wishes,
> Andrey
>
> P.S. the screenshot is too big for tinyos-help mailing list. So my first
> e-mail is pending to be delivered.
>
>
> Jürgen wrote:
>   
>> Thank you for your quick answer. Where to find the wirings? I just
>> searched through the atmel homepage and the documents on it, but didn't
>> find something useful. Creating a new platform is described in TEP 131,
>> am i right? Thank you.
>>
>> greets
>>
>>     
>>> Hi Jurgen,
>>>
>>> I am sorry, but you need to check on the scematics if the two system
>>> has identical wirings or not. You should create a differetnt platform
>>> and build it on top of the iris platform.
>>>
>>> Miklos
>>>
>>> On Tue, Sep 30, 2008 at 3:56 PM, Jürgen Broder <juergen_broder at gmx.at> wrote:
>>>   
>>>       
>>>> Hello everybody!
>>>>
>>>> I have loaded the Blink app onto my ATAVRRZ200 motes (AtMega 1281 /
>>>> rf230 zigbee), but the leds won't blink. Is it possible that the
>>>> Port-/Pinmapping of the IRIS platform doesn't fit my motes? Is there a
>>>> way to alter or configure it? Or do you know any other reasons why the
>>>> leds don't blink? Thank you!
>>>>
>>>> Greets,
>>>> Jürgen
>>>> _______________________________________________
>>>> Tinyos-help mailing list
>>>> Tinyos-help at millennium.berkeley.edu
>>>> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
>>>>
>>>>     
>>>>         
>>>   
>>>       
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> Tinyos-help mailing list
>> Tinyos-help at millennium.berkeley.edu
>> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
>>     
>
>