[Tinyos-help] Imote2 IIB2400 puzzled

[Giri Baleri]

This may not be the right forum to post Imote2 related questions. There
is a dedicated Imote2 user's group.
http://tech.groups.yahoo.com/group/intel-mote2-community/
 
The short answer to your question is that you would need IIB2400 only if
you want to JTAG the processor or change the bootloader. For normal
programming, you can use the USB interface on IPR2400.
 
Regards,
Giri

________________________________

From: tinyos-help-bounces at millennium.berkeley.edu
[mailto:tinyos-help-bounces at millennium.berkeley.edu] On Behalf Of caojr
Sent: Thursday, September 11, 2008 8:10 AM
To: tinyos-help at millennium.berkeley.edu
Subject: [Tinyos-help] Imote2 IIB2400 puzzled


Dear all, 
    Imote2 IIB2400 interface board providing dual USB serial ports and a
JTAG interface for the Imote2, as far as I know, the Imote2 board
IPR2400 can be programed through USB, and also through the JTAG. 
    what I want to know is, what is the difference between through USB
programming and JTAG programming, anyone can give me some clue?
I am looking forward to know the answer. 
Thank you all in advance!
 
                    Jierui
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.millennium.berkeley.edu/pipermail/tinyos-help/attachments/20080911/c901f22b/attachment.htm