[Tinyos-help] rz200

[Janos Sallai]

>The libusb IS INSTALLED (i am using ubuntu 
>8.04)!

Most probably the name of the package what you need to compile avrdude with USB support is called libusb-dev. Do you have that one installed?

>I recognized that there are two different 
>avrdude packages, the one delivered with tinyos (*avrdude-tinyos*) and 
>the "original" one (*avrdude*), am i right?
Yes, you're right. The former one contains a patch to support the MIB510 and MIB520 programming boards to program mica* and iris motes. Unfortunately, it is built without usb support. I will contact Kevin to rebuild it.

Thanks,
Janos

Best regards
Jürgen
> Juergen,
>
> The iris target is a good place to start with. If you're lucky enough the rf230 is hooked up to the MCU the same way on your demo kit as on the iris, and everything will work out of the box.
>
> Regarding programming using the avarisp mkII: In order to compile avrdude with usb support, you'll need libusb. Once you have libusb installed, avrdude's configure script will find it and will allow you to build avrdude with usb support.
>
> Janos
>
> -----Original Message-----
> From: tinyos-help-bounces at millennium.berkeley.edu [mailto:tinyos-help-bounces at millennium.berkeley.edu] On Behalf Of Jürgen Broder
> Sent: Thursday, September 04, 2008 6:55 AM
> To: tinyos-help at millennium.berkeley.edu
> Subject: [Tinyos-help] rz200
>
> Hello!
>
> I'm desperately trying to program the Blink-Application on my motes but 
> without success. I am using the ATAVRRZ200 demonstration kit from ATMEL 
> (ATMega1281 / rf230 -motes) with an AVRISPmkII USB-Programmer.
>
> My first question: is the iris-platform the correct choice for 
> programming my motes?
>
> Im quite sure that i have set up my tinyos environment correctly, 
> tos-check-env gives no errors and "make iris" is working too. But when 
> it gets down to load the file onto the mote i'm having serious problems. 
> It looks like the option "make iris install *avrisp*,..." is just for 
> the *serial* AVRISP, am i right? So when i tried to edit the Avrisp make 
> rules using usb port i get the error message "avrdude: compiling without 
> usb support". So can anybody give me an advice, how to program the rz200 
> using the AVRISPmkII? Thank you very much.
>
> Greets, Jürgen.
> _______________________________________________
> Tinyos-help mailing list
> Tinyos-help at millennium.berkeley.edu
> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
>
> No virus found in this incoming message.
> Checked by AVG - http://www.avg.com 
> Version: 8.0.169 / Virus Database: 270.6.19/1662 - Release Date: 9/9/2008 10:47 AM
>
> No virus found in this incoming message.
> Checked by AVG - http://www.avg.com 
> Version: 8.0.138 / Virus Database: 270.6.19/1664 - Release Date: 10.09.2008 06:00
>
>
>
>   


No virus found in this incoming message.
Checked by AVG - http://www.avg.com 
Version: 8.0.169 / Virus Database: 270.6.20/1666 - Release Date: 9/11/2008 6:55 PM