[Tinyos-help] b6lowpan: running problem

[alessandro ludovici]

 Hi,
I'm following the instruction contained in the
README<http://smote.cs.berkeley.edu:8000/tracenv/browser/code/b6lowpan/trunk/README>file
of the b6lowpan stack.
When I give the command "sudo  ./serial_tun /dev/ttyUSB0 telosb", I get the
following output with an error of address configuration. The Output is
reported below:
11:49:54.892278: INFO: created tunnel device: tun0
ifconfig tun0 up
ifconfig tun0 mtu 1280
ifconfig tun0 inet6 add 2001:470:1f04:56d:000:000:000:064/64
ifconfig tun0 inet6 add fe80::064/64
11:49:54.932662: INFO: send me SIGUSR1 to dump the topology to a
'nwgraph.dot' in the cwd
11:49:54.932939: INFO: send me SIGUSR2 to recompute and print source routes
to every router
Note: sync
11:49:54.989159: INFO: config error: 0x0 addr: 0x64

I Don't know where I made mistakes. My opinion is that I do not configure
well the "serial_tun.config". I have tried several configuration but it does
not work. Anyone can help me?

thanks in advance,
alessandro ludovici
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.millennium.berkeley.edu/pipermail/tinyos-help/attachments/20080925/78177048/attachment.htm