[Tinyos-help] Crossbow Technology: MDA300 Driver for Labview

[Giri Baleri]

If you are using XMesh app (XMDA300) then the data packet structure is
different from that of XMDA320. The XServe manual provides packet
structure and decoding info. 

http://www.xbow.com/Support/Support_pdf_files/XServe_Users_Manual.pdf 

You will either need to modify the MDA320 LabVIEW drivers or create a
new one.

 

Regards,

Giri

 

________________________________

From: tinyos-help-bounces at millennium.berkeley.edu
[mailto:tinyos-help-bounces at millennium.berkeley.edu] On Behalf Of
Kimberly Kee
Sent: Tuesday, February 17, 2009 6:44 AM
To: tinyos-help at millennium.berkeley.edu
Subject: [Tinyos-help] Crossbow Technology: MDA300 Driver for Labview

 

Hi all,

 

I have created a GUI using Labview to read data from MDA300 and MTS400..
In Labview, the MDA320 can only reads Battery Voltage, ADC0 (V) and Time
Stamp from my MDA300. I need to read the temperature and humidity data
from MDA300 in Labview and I need to know how can I send a signal to
MDA300 to excite the relay in it through Labview. I understand from
Crossbow support that I need to produce a driver for MDA300 in order to
achieve the mentioned objectives and I'd been redirected to seek help
from the TinyOS group thru email. I was told that the driver for MDA300
might have been created by TinyOS group. 

 

Can anyone help me with my above question?

Your help will be very much appreciated.

 

Best Regards,

Kimberly

 

________________________________

New Email addresses available on Yahoo!
<http://sg.rd.yahoo.com/aa/mail/domainchoice/mail/signature/*http:/mail.
promotions.yahoo.com/newdomains/aa/> 
Get the Email name you've always wanted on the new @ymail and
@rocketmail.
Hurry before someone else does!

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.millennium.berkeley.edu/pipermail/tinyos-help/attachments/20090217/52271334/attachment-0001.htm