[Tinyos-help] Batter Monitor

[Mohamed H. Seddik]

Hi All
 
How can turn off all the peripherals  ( MCU , Radio,sensor etc ) in the mote. or make put them in a low power mode.
 
and if I put the MCU in sleep power mode. how can it wakes by itself


 

Thanks  
 
Mohamed

--- On Thu, 2/26/09, Razvan Musaloiu-E. <razvanm at cs.jhu.edu> wrote:

From: Razvan Musaloiu-E. <razvanm at cs.jhu.edu>
Subject: Re: [Tinyos-help] Batter Monitor
To: "Mohamed H. Seddik" <mhsedek at yahoo.com>
Cc: tinyos-help at millennium.berkeley.edu
Date: Thursday, February 26, 2009, 3:30 AM

Hi!

On Wed, 25 Feb 2009, Mohamed H. Seddik wrote:

> 
> Hi all
> 
> I need your help urgently, is it poosible to sense or monitor the battery
voltage level by tinyos if yes how, if not can we develope something do this in
tinyos ???

VoltageC (tos/platforms/*/VoltageC.nc) is the component that usually implements
the battery voltage. For MicaZ and Telos the DemoSensorC is wired to VoltageC so
all the demo apps from the Oscilloscope family are actually reporting the
battery voltage. :-)

--
Razvan ME



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.millennium.berkeley.edu/pipermail/tinyos-help/attachments/20090226/dc59c00f/attachment.htm