[Tinyos-help] Problem while deploying Agilla on Mica2 sensors

[Ranjani Nagarajan]

Hi there,

I am trying to deploy Agilla on Mica2 sensors.  Agilla is a middleware that
helps in development of mobile agents (
http://www.cs.wustl.edu/mobilab/projects/agilla/). I am using TinyOS 2.x. I
am able to compile Agilla but I am facing the following problem while
deploying:

Command:   make mica2 reinstall,1 mib510,com1
Cygwin:    C:\Crossbow\cygwin\bin
Directory: C:\Crossbow\cygwin\opt\MoteWorks\apps\general\Agilla\nesc\agilla\
"/opt/MoteWorks/tools/bin/ide.pl 'make mica2 reinstall,1 mib510,com1'
'C:\Crossbow\cygwin\opt\MoteWorks\apps\general\Agilla\nesc\agilla\'"
#############################
ide.pl Ver:$Id: ide.pl,v 1.1.2.1 2006/05/29 07:22:52 lwei Exp $
Executing: /opt/MoteWorks/apps/general/Agilla/nesc/agilla/ bash -c "make
mica2 reinstall,1 mib510,com1"
set-mote-id build/mica2/main.srec build/mica2/main.srec.out-1 1
    installing mica2 binary using mib510
uisp -dprog=mib510 -dserial=com1 --wr_fuse_h=0xd9 -dpart=ATmega128
--wr_fuse_e=ff  --erase --upload if=build/mica2/main.srec.out-1
Error: No error
make: *** [program] Error 1
 -> \\.\COM1

> Process Exit Code: 0
> Time Taken: 00:02


I am not sure why this is happening and the error is not very descriptive.
Please let me know if you have faced similar problem before or if you have
any ideas about why this may be happening. I will really appreciate your
help.

Thanks,
Ranjani
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.millennium.berkeley.edu/pipermail/tinyos-help/attachments/20090112/57b5496d/attachment.htm