[Tinyos-help] Problem while deploying Agilla on Mica2 sensors

[Michael Schippling]

Have you been able to download anything to your micas
or is it just failing on the real program you want to use?
Are you sure the COM1 is the right port?
You might try using "/dev/ttyS0" instead of COM1 as well.

MS

Ranjani Nagarajan wrote:
> Hi there,
> 
> I am trying to deploy Agilla on Mica2 sensors.  Agilla is a middleware 
> that helps in development of mobile agents 
> (http://www.cs.wustl.edu/mobilab/projects/agilla/). I am using TinyOS 
> 2.x. I am able to compile Agilla but I am facing the following problem 
> while deploying:
> 
> Command:   make mica2 reinstall,1 mib510,com1
> Cygwin:    C:\Crossbow\cygwin\bin
> Directory: C:\Crossbow\cygwin\opt\MoteWorks\apps\general\Agilla\nesc\agilla\
> "/opt/MoteWorks/tools/bin/ide.pl 'make mica2 reinstall,1 mib510,com1' 
> 'C:\Crossbow\cygwin\opt\MoteWorks\apps\general\Agilla\nesc\agilla\'"
> #############################
> ide.pl Ver:$Id: ide.pl,v 1.1.2.1 2006/05/29 07:22:52 lwei Exp $
> Executing: /opt/MoteWorks/apps/general/Agilla/nesc/agilla/ bash -c "make 
> mica2 reinstall,1 mib510,com1"
> set-mote-id build/mica2/main.srec build/mica2/main.srec.out-1 1
>     installing mica2 binary using mib510
> uisp -dprog=mib510 -dserial=com1 --wr_fuse_h=0xd9 -dpart=ATmega128 
> --wr_fuse_e=ff  --erase --upload if=build/mica2/main.srec.out-1
> Error: No error
> make: *** [program] Error 1
>  -> \\.\COM1
> 
>  > Process Exit Code: 0
>  > Time Taken: 00:02
> 
> 
> I am not sure why this is happening and the error is not very 
> descriptive. Please let me know if you have faced similar problem before 
> or if you have any ideas about why this may be happening. I will really 
> appreciate your help.
> 
> Thanks,
> Ranjani
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> Tinyos-help mailing list
> Tinyos-help at millennium.berkeley.edu
> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help

-- 
Platform: WinXP/Cygwin
TinyOS version: 1.x, Boomerang
Programmer: MIB510
Device(s): Mica2, MicaZ, Tmote
Sensor board: homebrew