[Tinyos-help] Problem while deploying Agilla on Mica2 sensors

[Ranjani Nagarajan]

Hi Michael,

I found that all of a sudden the Blink application is also not getting
deployed. However, the Blink application already deployed is working (Red
LED blinks once per second). I find that the first time I try to execute the
"make mica2 reinstall mib510,com" command, it hangs after the uisp
commandline. If I invoke it again, I get the error :

Error: No error
 -> \\.\COM1
make: *** [program] Error 1

I am not sure why this is happening.

Thanks,
Ranjani


On Wed, Jan 14, 2009 at 6:26 AM, Michael Schippling <schip at santafe.edu>wrote:

> Try comparing the "uisp" command lines that are generated
> by working and not working examples, and maybe run them by hand.
>
> It also could be that you don't have a good download file and the
> error message is wrong...check through the build output directories
> to see what is actually there.
>
> MS
>
> Ranjani Nagarajan wrote:
>
>> Hi Michael,
>>
>> Thanks a lot for your email. I have been able to deploy and run Blink
>> application on the sensors, but when I tried to deploy Agilla this problem
>> surfaced. I have also tried /dev/ttyS0 but that didn't help. I have checked
>> the device manager for the serial port and it is COM1. I have tried with
>> different cases for COM1 (com1 and COM1) but that didn't help either.
>>
>> Thanks,
>> Ranjani
>>
>> On Tue, Jan 13, 2009 at 5:53 AM, Michael Schippling <schip at santafe.edu<mailto:
>> schip at santafe.edu>> wrote:
>>
>>    Have you been able to download anything to your micas
>>    or is it just failing on the real program you want to use?
>>    Are you sure the COM1 is the right port?
>>    You might try using "/dev/ttyS0" instead of COM1 as well.
>>
>>    MS
>>
>>    Ranjani Nagarajan wrote:
>>
>>        Hi there,
>>
>>        I am trying to deploy Agilla on Mica2 sensors.  Agilla is a
>>        middleware that helps in development of mobile agents
>>        (http://www.cs.wustl.edu/mobilab/projects/agilla/). I am using
>>        TinyOS 2.x. I am able to compile Agilla but I am facing the
>>        following problem while deploying:
>>
>>        Command:   make mica2 reinstall,1 mib510,com1
>>        Cygwin:    C:\Crossbow\cygwin\bin
>>        Directory:
>>        C:\Crossbow\cygwin\opt\MoteWorks\apps\general\Agilla\nesc\agilla\
>>        "/opt/MoteWorks/tools/bin/ide.pl 'make mica2 reinstall,1
>>        mib510,com1'
>>
>>  'C:\Crossbow\cygwin\opt\MoteWorks\apps\general\Agilla\nesc\agilla\'"
>>        #############################
>>        ide.pl Ver:$Id: ide.pl,v 1.1.2.1 2006/05/29 07:22:52 lwei Exp $
>>        Executing: /opt/MoteWorks/apps/general/Agilla/nesc/agilla/ bash
>>        -c "make mica2 reinstall,1 mib510,com1"
>>        set-mote-id build/mica2/main.srec build/mica2/main.srec.out-1 1
>>           installing mica2 binary using mib510
>>        uisp -dprog=mib510 -dserial=com1 --wr_fuse_h=0xd9
>>        -dpart=ATmega128 --wr_fuse_e=ff  --erase --upload
>>        if=build/mica2/main.srec.out-1
>>        Error: No error
>>        make: *** [program] Error 1
>>         -> \\.\COM1
>>
>>         > Process Exit Code: 0
>>         > Time Taken: 00:02
>>
>>
>>        I am not sure why this is happening and the error is not very
>>        descriptive. Please let me know if you have faced similar
>>        problem before or if you have any ideas about why this may be
>>        happening. I will really appreciate your help.
>>
>>        Thanks,
>>        Ranjani
>>
>>
>>
>>  ------------------------------------------------------------------------
>>
>>        _______________________________________________
>>        Tinyos-help mailing list
>>        Tinyos-help at millennium.berkeley.edu
>>        <mailto:Tinyos-help at millennium.berkeley.edu>
>>
>> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
>>
>>
>>    --    Platform: WinXP/Cygwin
>>    TinyOS version: 1.x, Boomerang
>>    Programmer: MIB510
>>    Device(s): Mica2, MicaZ, Tmote
>>    Sensor board: homebrew
>>
>>
>>
> --
> Platform: WinXP/Cygwin
> TinyOS version: 1.x, Boomerang
> Programmer: MIB510
> Device(s): Mica2, MicaZ, Tmote
> Sensor board: homebrew
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.millennium.berkeley.edu/pipermail/tinyos-help/attachments/20090115/598095e5/attachment.htm