No subject
Tue Jan 13 16:53:41 PST 2009
s unreachable<br>
<br>
It seem like no communication between base station and the second sensor mo=
te. Do you have any suggestion how to solve this issue?<br>
<br>
Thanks<br>
Best regards<br>
ansar<br>
<br>
<br>
--- On Sun, 2/8/09, Stephen Dawson-Haggerty <<a href=3D"mailto:stevedh at e=
ecs.berkeley.edu">stevedh at eecs.berkeley.edu</a>> wrote:<br>
<br>
> From: Stephen Dawson-Haggerty <<a href=3D"mailto:stevedh at eecs.berke=
ley.edu">stevedh at eecs.berkeley.edu</a>><br>
> Subject: Re: [Tinyos-help] b6lowpan: tunnel problems<br>
> To: "Brendan Cody Kenny" <<a href=3D"mailto:codykenny at gma=
il.com">codykenny at gmail.com</a>><br>
> Cc: <a href=3D"mailto:tinyos-help at millennium.berkeley.edu">tinyos-help=
@millennium.berkeley.edu</a><br>
> Date: Sunday, February 8, 2009, 4:16 PM<br>
<div><div></div><div class=3D"Wj3C7c">> Hi Brendan-- It sounds like a co=
uple of people have been<br>
> having this<br>
> problem. I think we've reproduced it here (finally)<br>
> and it seems specific<br>
> to ubuntu, so I'll have a look this afternoon and see<br>
> if I can get to the<br>
> bottom of it. Hopefully I'll have a patch later today<br>
> that fixes the issue.<br>
><br>
> Steve<br>
><br>
> On Sat, Feb 7, 2009 at 5:38 AM, Brendan Cody Kenny<br>
> <<a href=3D"mailto:codykenny at gmail.com">codykenny at gmail.com</a>>=
wrote:<br>
><br>
> > Hi All,<br>
> ><br>
> > I had the same problem on ubuntu based distro. fixed<br>
> it by checking<br>
> > some of the following along with working through the<br>
> readme:<br>
> ><br>
> > the readme mentions "$TOS_ROOT" which is not<br>
> set by tinyos2.1.0 (it<br>
> > sets $TOSROOT) so set $TOS_ROOT =3D $TOSROOT<br>
> ><br>
> > make sure that permissions are correct on ttyUSB1 and<br>
> TTYUSB0 (i just<br>
> > set them to 777 to be sure)<br>
> ><br>
> > I now get the tunnel up, have installed UPDEcho on<br>
> some motes as per<br>
> > readme, but there doesnt seem to be any communication<br>
> between mote and<br>
> > base station.<br>
> ><br>
> > I turn on the mote, expect it to contact the base<br>
> station and the<br>
> > driver sets up the routing.<br>
> ><br>
> > I am using the UDPEcho from conrtib as released<br>
> 11-13-2008 and<br>
> > everything else seems fine as instructed.<br>
> ><br>
> > Whats missing here?<br>
> ><br>
> > Thanks,<br>
> > Brendan.<br>
> > _______________________________________________<br>
> > Tinyos-help mailing list<br>
> > <a href=3D"mailto:Tinyos-help at millennium.berkeley.edu">Tinyos-hel=
p at millennium.berkeley.edu</a><br>
> ><br>
> <a href=3D"https://www.millennium.berkeley.edu/cgi-bin/mailman/listinf=
o/tinyos-help" target=3D"_blank">https://www.millennium.berkeley.edu/cgi-bi=
n/mailman/listinfo/tinyos-help</a><br>
> ><br>
> _______________________________________________<br>
> Tinyos-help mailing list<br>
> <a href=3D"mailto:Tinyos-help at millennium.berkeley.edu">Tinyos-help at mil=
lennium.berkeley.edu</a><br>
> <a href=3D"https://www.millennium.berkeley.edu/cgi-bin/mailman/listinf=
o/tinyos-help" target=3D"_blank">https://www.millennium.berkeley.edu/cgi-bi=
n/mailman/listinfo/tinyos-help</a><br>
<br>
<br>
<br>
</div></div></blockquote></div><br>
--0015175d672e286c160462aa74bd--
More information about the Tinyos-help
mailing list