[Tinyos-help] A lot of Bad packet messages printed in the prompt window
Michael Schippling
schip at santafe.edu
Sat Jul 18 17:27:35 PDT 2009
I found the "retraction period" to be significant in my
reliability testing that I've previously ref'ed. Things
were greatly improved by putting a small delay between the
reception of a message and the sending of a new message
at the host end. I don't know if this a host effect or
slow switching from receive to xmit on the radio end.
It was much more pronounced on the mica2's than the 'Z's.
I didn't do any extensive testing with the telosb.
MS
Maisa Ben Jamaa wrote:
> Hi,
> Umm, so this can be like a collision that was being happening over the
> serial communication channel.
> Thank you Faisal
>
> 2009/7/18 Faisal Aslam <aslam at informatik.uni-freiburg.de
> <mailto:aslam at informatik.uni-freiburg.de>>
>
> Hi,
>
> I also have this error if I send packet from mote too fast (Usually
> in a loop). If you can have a small delay between packets being send
> from mote then you will have lesser bad packets errors.
>
> best regards,
> Faisal
>
> Maisa Ben Jamaa wrote:
>
> Hi,
>
> If tinyos reports a lot of bad packet messages during a pc and
> sensor mote
> communication based on an usb connection, so in your opinion why
> this,
> is happening?
>
> Precisely, what causes that the *packet crc* is different from
> the computed one?
> (more details can be found in Packetizer.java file)
>
> Best regards,
> Maissa Ben Jamaa
> _______________________________________________
> Tinyos-help mailing list
> Tinyos-help at millennium.berkeley.edu
> <mailto:Tinyos-help at millennium.berkeley.edu>
> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
>
>
>
>
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Tinyos-help mailing list
> Tinyos-help at millennium.berkeley.edu
> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
More information about the Tinyos-help
mailing list