[Tinyos-help] Problems setting up MSP430

[aldo]

when i do what you say Michiel appears this:

*aldo at aldo-laptop:/etc/udev/rules.d$ /etc/init.d/udev reload
 * Reloading kernel event
manager...                                            No /sbin/udevd found
running; none killed.

[fail]
aldo at aldo-laptop:/etc/udev/rules.d$ *

and in dmesg:

[ 1241.820055] usb 2-2: new full speed USB device using uhci_hcd and address
2
[ 1242.073796] usb 2-2: configuration #1 chosen from 1 choice
[ 1252.149330] /build/buildd/linux-2.6.28/drivers/hid/usbhid/hid-core.c:
usb_submit_urb(ctrl) failed
[ 1252.149365] generic-usb 0003:0451:F432.0002: timeout initializing reports
[ 1252.150862] generic-usb 0003:0451:F432.0002: hiddev96,hidraw1: USB HID
v1.01 Device [Texas Instruments Texas Instruments MSP-FET430UIF] on
usb-0000:00:1d.0-2/input1
[ 1252.162785] cdc_acm 2-2:1.0: This device cannot do calls on its own. It
is no modem.
[ 1252.162840] usbcore: registered new interface driver cdc_acm
[ 1252.162850] cdc_acm: v0.26:USB Abstract Control Model driver for USB
modems and ISDN adapters

the same as always...


2009/6/3 Michiel Konstapel <m.konstapel at sownet.nl>

>  You need to specify an additional parameter to make it pick the correct
> configuration. The easiest way to do this automatically is to add a udev
> rule. Create the following file:
>
>
>
> /etc/udev/rules.d/26-ti.rules
>
>
>
> With the contents:
>
>
>
> SUBSYSTEM=="usb_device" ACTION=="add" SYSFS{product}=="MSP-FET430UIF JTAG
> Tool", SYSFS{bNumConfigurations}=="2", SYSFS{bConfigurationValue}=="1",
> RUN+="/bin/sh -c 'echo 2 >/sys%p/device/bConfigurationValue'"
>
>
>
> Then, reload udev (/etc/init.d/udev reload) and replug the device. That
> should result in a /dev/ttyUSB0.
>
>
>
> HTH,
>
> Michiel
>
>
>
> *From:* tinyos-help-bounces at millennium.berkeley.edu [mailto:
> tinyos-help-bounces at millennium.berkeley.edu] *On Behalf Of *aldo
> *Sent:* dinsdag 2 juni 2009 21:31
> *To:* tinyos-help at millennium.berkeley.edu
> *Subject:* [Tinyos-help] Problems setting up MSP430
>
>
>
> Hello,
>
> I'm very dissapointed. I can't do the driver ti_usb_3410_5052 to work.
> when i plug the eZ430-RF2500 i see in dmesg:
>
> new full speed USB device using uhci_hcd and address 8
> [10543.862495] usb 2-2: configuration #1 chosen from 1 choice
> [10543.866150] cdc_acm 2-2:1.0: This device cannot do calls on its own. It
> is no modem.
> [10553.925325] /build/buildd/linux-2.6.28/drivers/hid/usbhid/hid-core.c:
> usb_submit_urb(ctrl) failed
> [10553.925901] generic-usb 0003:0451:F432.0008: timeout initializing
> reports
> [10553.927537] generic-usb 0003:0451:F432.0008: hiddev96,hidraw1: USB HID
> v1.01 Device [Texas Instruments Texas Instruments MSP-FET430UIF] on
> usb-0000:00:1d.0-2/input1
>
> I'll tried a lot of things to achieve this in dmesg:
>
> usb 1-2: TI USB 3410 1 port adapter converter now attached to ttyUSB0
>
>
> Anyone can help me? any idea?
>
> Thank you in advance.
> --
> aldo
>



-- 
aldo
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.millennium.berkeley.edu/pipermail/tinyos-help/attachments/20090604/27d6bedf/attachment-0001.htm