[Tinyos-help] Problems setting up MSP430

[aldo]

What's the difference between placing a rule in etc/udev/rules.d or in
/lib/udev/rules.d???

2009/6/4 aldo <amoyaortega at gmail.com>

> when i do what you say Michiel appears this:
>
> *aldo at aldo-laptop:/etc/udev/rules.d$ /etc/init.d/udev reload
>  * Reloading kernel event
> manager...                                            No /sbin/udevd found
> running; none killed.
>
> [fail]
> aldo at aldo-laptop:/etc/udev/rules.d$ *
>
> and in dmesg:
>
> [ 1241.820055] usb 2-2: new full speed USB device using uhci_hcd and
> address 2
> [ 1242.073796] usb 2-2: configuration #1 chosen from 1 choice
> [ 1252.149330] /build/buildd/linux-2.6.28/drivers/hid/usbhid/hid-core.c:
> usb_submit_urb(ctrl) failed
> [ 1252.149365] generic-usb 0003:0451:F432.0002: timeout initializing
> reports
> [ 1252.150862] generic-usb 0003:0451:F432.0002: hiddev96,hidraw1: USB HID
> v1.01 Device [Texas Instruments Texas Instruments MSP-FET430UIF] on
> usb-0000:00:1d.0-2/input1
> [ 1252.162785] cdc_acm 2-2:1.0: This device cannot do calls on its own. It
> is no modem.
> [ 1252.162840] usbcore: registered new interface driver cdc_acm
> [ 1252.162850] cdc_acm: v0.26:USB Abstract Control Model driver for USB
> modems and ISDN adapters
>
> the same as always...
>
>
> 2009/6/3 Michiel Konstapel <m.konstapel at sownet.nl>
>
>  You need to specify an additional parameter to make it pick the correct
>> configuration. The easiest way to do this automatically is to add a udev
>> rule. Create the following file:
>>
>>
>>
>> /etc/udev/rules.d/26-ti.rules
>>
>>
>>
>> With the contents:
>>
>>
>>
>> SUBSYSTEM=="usb_device" ACTION=="add" SYSFS{product}=="MSP-FET430UIF JTAG
>> Tool", SYSFS{bNumConfigurations}=="2", SYSFS{bConfigurationValue}=="1",
>> RUN+="/bin/sh -c 'echo 2 >/sys%p/device/bConfigurationValue'"
>>
>>
>>
>> Then, reload udev (/etc/init.d/udev reload) and replug the device. That
>> should result in a /dev/ttyUSB0.
>>
>>
>>
>> HTH,
>>
>> Michiel
>>
>>
>>
>> *From:* tinyos-help-bounces at millennium.berkeley.edu [mailto:
>> tinyos-help-bounces at millennium.berkeley.edu] *On Behalf Of *aldo
>> *Sent:* dinsdag 2 juni 2009 21:31
>> *To:* tinyos-help at millennium.berkeley.edu
>> *Subject:* [Tinyos-help] Problems setting up MSP430
>>
>>
>>
>> Hello,
>>
>> I'm very dissapointed. I can't do the driver ti_usb_3410_5052 to work.
>> when i plug the eZ430-RF2500 i see in dmesg:
>>
>> new full speed USB device using uhci_hcd and address 8
>> [10543.862495] usb 2-2: configuration #1 chosen from 1 choice
>> [10543.866150] cdc_acm 2-2:1.0: This device cannot do calls on its own. It
>> is no modem.
>> [10553.925325] /build/buildd/linux-2.6.28/drivers/hid/usbhid/hid-core.c:
>> usb_submit_urb(ctrl) failed
>> [10553.925901] generic-usb 0003:0451:F432.0008: timeout initializing
>> reports
>> [10553.927537] generic-usb 0003:0451:F432.0008: hiddev96,hidraw1: USB HID
>> v1.01 Device [Texas Instruments Texas Instruments MSP-FET430UIF] on
>> usb-0000:00:1d.0-2/input1
>>
>> I'll tried a lot of things to achieve this in dmesg:
>>
>> usb 1-2: TI USB 3410 1 port adapter converter now attached to ttyUSB0
>>
>>
>> Anyone can help me? any idea?
>>
>> Thank you in advance.
>> --
>> aldo
>>
>
>
>
> --
> aldo
>



-- 
aldo
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.millennium.berkeley.edu/pipermail/tinyos-help/attachments/20090604/68b2270a/attachment.htm