[Tinyos-help] Crossbow Technology: MDA300 Driver for Labview

[Kimberly Kee]

Hi all, 
Can anyone help with my problem below?
 
Best regards,
Kimberly


--- On Tue, 17/2/09, Kimberly Kee <kimberly_kml at yahoo.com> wrote:


From: Kimberly Kee <kimberly_kml at yahoo.com>
Subject: Crossbow Technology: MDA300 Driver for Labview
To: tinyos-help at millennium.berkeley.edu
Date: Tuesday, 17 February, 2009, 6:43 AM








Hi all,
 
I have created a GUI using Labview to read data from MDA300 and MTS400. In Labview, the MDA320 can only reads Battery Voltage, ADC0 (V) and Time Stamp from my MDA300. I need to read the temperature and humidity data from MDA300 in Labview and I need to know how can I send a signal to MDA300 to excite the relay in it through Labview. I understand from Crossbow support that I need to produce a driver for MDA300 in order to achieve the mentioned objectives and I'd been redirected to seek help from the TinyOS group thru email. I was told that the driver for MDA300 might have been created by TinyOS group. 
 
Can anyone help me with my above question?
Your help will be very much appreciated.
 
Best Regards,
Kimberly


New Email addresses available on Yahoo! 
Get the Email name you've always wanted on the new @ymail and @rocketmail.
Hurry before someone else does!


      Get your preferred Email name!
Now you can @ymail.com and @rocketmail.com. 
http://mail.promotions.yahoo.com/newdomains/aa/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.millennium.berkeley.edu/pipermail/tinyos-help/attachments/20090302/02bbded2/attachment.htm