[Tinyos-help] probelm with viewing the data in xserve or MoteView

[Mohammad S. Hashemian]

Hi fellows,

I was working on a program for MicaZ and I wanted to see all the data that
server receives in MoteView, everything was fine and even the program was
close to the end, but all of the sudden once that I tried to test my program
again, Moteview or XServe didn't show any result anymore. The LEDs on the
motes were blinking which meant that everything work fine in motes, but no
result in xserve or MoteView.
I tested many things, even I installed a fresh version of MoteWorks and
MoteView on another PC, and tried to install the lesson_2 example of
MoteWorks on a mote to see if it works or not, but still nothing was shown
by xserve or moteview. does anyone have any clue about the problem? I
thought the programmer (MIB510) or Serial-to-USB cable might has problem,
but if they have proble, so why I can program any motes correctly?

thanks a lot

-- 
Mohammad S. Hashemian
Research Scholar/DISCUS Lab
Department of Computer Science
254.2 Thorvaldson Building
University of Saskatchewan
(306)966-1947
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.millennium.berkeley.edu/pipermail/tinyos-help/attachments/20090303/2bfd99a2/attachment.htm