[Tinyos-help] sht11 on IRIS

[Javier Almansa Sobrino]

On Wed, 5 Nov 2008 16:18:52 -0600
"Janos Sallai" <sallai at isis.vanderbilt.edu> wrote:

> It shouldn't be too complicated. Cretate a new directory called sht11 under
> tos\platforms\iris\chips. Copy all files from
> tos\platforms\telosa\chips\sht11to tos\platforms\iris\chips\sht11. Then, add
> %T/platforms/iris/chips/sht11 to the includes list in
> %T/platforms/iris/.platform. You will need to modify
> tos\platforms\iris\chips\sht11\HplSensirionSht11C.nc to describe which pins
> of the atmega1281 the sht11 is connected to. Obviously, you will nee to
> replace HplMsp430GeneralIOC with HplAtm128GeneralIOC and HplMsp430InterruptC
> with HplAtm128InterruptC.

Anybody knows what GPIO and wath Interrupt are used for a MDA300 sht11
atachhed to a iris2. 
I'm readed the sensor board users manual but I didn't found any
information

Thanks a lot.


-- 
Nunca confies en un S.O. del que no tienes código fuente ;-)

--------------------------------
Javier Almansa Sobrino.
Ingeniero Técnico en Informática de Sistemas.

FSF #7032 Member (www.fsf.com)

Grupo de Investigación ARCo.
Escuela Superior de Informática. Ciudad Real
Tel: (+34)926 29 53 00 Ext: 3705