[Tinyos-help] make micaz instlal - why it won't work?

[George Adamides]

Hello again
OK I followed the instructions but it still doesn;t work. This is what I get:

[root at localhost Blink]# make mica2 reinstall mib510,/dev/ttyUSB0
cp build/mica2/main.srec build/mica2/main.srec.out
cp: cannot stat `build/mica2/main.srec': No such file or directory
make: *** [setid] Error 1
[root at localhost Blink]# 


 --
George Adamides




________________________________
From: Marco Antonio Lopez Trinidad <marco.lopez at unige.it>
To: George Adamides <gmadamide at yahoo.com>
Sent: Tuesday, March 24, 2009 12:15:03 PM
Subject: Re: [Tinyos-help] make micaz instlal - why it won't work?


Hi,

"dmesg"

--marco.

> Thank you for this information. I am running this on linux FEDORA 9. Do you
> know how can I find out which USB port I am using?
>
>  --
> George Adamides
>
>
>
>
> ________________________________
> From: Marco Antonio Lopez Trinidad <marco.lopez at unige.it>
> To: George Adamides <gmadamide at yahoo.com>
> Sent: Tuesday, March 24, 2009 12:03:20 PM
> Subject: Re: [Tinyos-help] make micaz instlal - why it won't work?
>
>
> Hi,
>
> It looks like the make command call is incomplete.
>
> It should be:
>
> "make micaz install,NODE_ID programming_board,programming_port"
>
> programming_board is the one you have, a mib maybe.
> programming_port is the port where the programing board is plugged, any
> /dev/ttyXXX.
>
> --marco.
>
> > Hello everybody
> > I am trying do something very simple, basically through the tutorials,
> since
> > I am new to the tinyOS. Anyways, when trying to compile the very simple
> Blink
> > application using $make micaz install, I get the following error on my
> > screen. I would appreciate it if someone could explain what am i doing
> wrong.
> > Thank you
> >
> > [root at localhost Blink]# make micaz install
> > mkdir -p build/micaz
> >     compiling BlinkAppC to a micaz binary
> > ncc -o build/micaz/main.exe  -Os -Wall -Wshadow -Wnesc-all -target=micaz
> > -fnesc-cfile=build/micaz/app.c -board=micasb -DDEFINED_TOS_AM_GROUP=0x22
> > --param max-inline-insns-single=100000 -DIDENT_APPNAME=\"BlinkAppC\"
> > -DIDENT_USERNAME=\"root\" -DIDENT_HOSTNAME=\"localhost.local\"
> > -DIDENT_USERHASH=0x53b81074L -DIDENT_TIMESTAMP=0x49c8e821L
> > -DIDENT_UIDHASH=0xfd38e8feL -fnesc-dump=wiring
> > -fnesc-dump='interfaces(!abstract())'
> -fnesc-dump='referenced(interfacedefs,
> > components)' -fnesc-dumpfile=build/micaz/wiring-check.xml BlinkAppC.nc -lm
> > /opt/tinyos-2.x/tos/chips/atm128/timer/HplAtm128Timer0AsyncP.nc:178:
> internal
> > compiler error: in start_function, at c-decl.c:6248
> >
> >
> >  --
> > George Adamides
> >
> >
> >
> >
>
>
>


      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.millennium.berkeley.edu/pipermail/tinyos-help/attachments/20090324/0d675d08/attachment.htm