[Tinyos-help] Issue with the ADC on an Iris Mote using TinyOS 2.x
Robert F. Ammon
Robert.Ammon at tufts.edu
Fri Apr 9 11:29:32 PDT 2010
I need at least 150Hz for one channel (the more the better) and the
others do not need to be fast at all as the sensors attached will not
change all that fast.
Quoting Miklos Maroti <mmaroti at math.u-szeged.hu>:
> Hi Robert,
> What sampling rate do you want to achieve?
> On Thu, Apr 8, 2010 at 8:37 PM, Robert F. Ammon
> <Robert.Ammon at tufts.edu> wrote:
>> (This was sent back to me because it was identified as spam by the
>> mailing list and I do not think that it was actually sent to the list.
>> Sorry if this is the second one I have sent)
>> I am currently working on a project using an Iris mote and I am having
>> some problems. I have developed a custom sensor node that I have
>> attached to a female 51-pin connector. There are three sensors on the
>> node that are currently hooked up to ADC0-2. What I want to do is write
>> a program that will sample all three of these sensors (only one has to
>> be at a high rate) and perform some processing on them. The processing
>> itself is simple and easy, getting the actual data to do the processing
>> on? A little more complicated, at least to me. I have looked around the
>> internet, the tutorials, and the mailing list for the last several days
>> and have just ended up more confused than before.
>> I have seen differing opinions on how to sample several sensors at
>> once, I have seen several opposing views on what files to modify or
>> create, and so on and so forth. Could someone please explain (or point
>> me in the direction of a guide) how you can sample several channels of
>> the ADC at once and store that data in a buffer?
>> Your help is greatly appreciated.
>> Robert Ammon
>> Tinyos-help mailing list
>> Tinyos-help at millennium.berkeley.edu
More information about the Tinyos-help