[Tinyos-help] TelosB command
sapojnik at gmail.com
Tue Apr 27 10:30:34 PDT 2010
for com6 the command is:
make telosb reinstall bsl,/dev/ttyUSB6 (Linux)
make telosb reinstall bsl,6 (Windows)
I suggest you to read the tutorials:
On Tue, Apr 27, 2010 at 18:56, Group <mailforgroup at gmail.com> wrote:
> Thanks for the command. Its very useful for me. Also i'm trying with the
> command to
> send to a particular COM port.
> some thing like...
> make telosb install.1,COM6. (on TinyOS-2.x). But this is not working.
> Is there any change in the command. Please let me know. Thanks.
> On Tue, Apr 27, 2010 at 12:04 AM, Arik Sapojnik <sapojnik at gmail.com>wrote:
>> The command is *re*install.
>> You can use it with the same syntax as install.
>> Instead of compiling the image again, it loads the ready bin file.
>> On Tue, Apr 27, 2010 at 03:28, Group <mailforgroup at gmail.com> wrote:
>>> I'm just wondering if there is any command to directly load the image on
>>> TelosB mote.
>>> I would like to skip the compilation part as it is taking lot of time. I
>>> tried executing the
>>> command found in 'make telosb install.1' execution output.
>>> Something like this..
>>> $tos-set-symbols --objcopy msp430-objcopy <...>
>>> but this is not working.
>>> Can any one suggest me on how to do this. Thanks in advance.
>>> Tinyos-help mailing list
>>> Tinyos-help at millennium.berkeley.edu
>> Best Regards,
>> Arik Sapojnik
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Tinyos-help