[Tinyos-help] tinyos not running in micaz board

He Dajiang (I2R) hedj at i2r.a-star.edu.sg
Thu Nov 6 04:57:28 PST 2014

Hi all,

We've made sensor board based on micaz architecture. The board does not work even for the simple Blink application; we managed to flash firmware into the board by using tinyos make tools (make micaz reinstall.x ...).
However, if we bypass tinyos and flash simple blinking code into the board (SET and CLEAR the MCU pins linking to the led), it can function and hardare leds blink. I take a look at app.c of tinyos blink app, before Blink__booted function is called, there are some other hardware, platform, and software init functions being called. Can I ask questions to the creators of tinyos, what are the checkings tinyos does when booting up? I guess some of the checkings failed on my board so that tinyos Blink app does not run in my board.

Thx & Regards

Institute for Infocomm Research disclaimer:  "This email is confidential and may be privileged. If you are not the intended recipient, please delete it and notify us immediately. Please do not copy or use it for any purpose, or disclose its contents to any other person. Thank you."

More information about the Tinyos-help mailing list