[Tinyos-host-mote-wg] Re: [Tinyos-2.0wg] "upgrade to tinyos 2.x" instructions

[Kristin Wright]

On 8/18/05, David Gay <dgay42 at gmail.com> wrote:
> On 8/18/05, Kristin Wright <l.kristin.wright at gmail.com> wrote:
> > After thinking about it, I thought that right now we need a "here's
> > how to upgrade from tinyos-1.x to  tinyos-2.x"  rather than a "here's
> > how to install tinyos-2.x from  scratch"  so I wrote that. (Of course
> > we'll need the former, too, but I'll write that later). Perhaps this
> > document will morph into that .. I'm not sure.
> >
> > The document is in 2.x/doc/upgrade-tools.html.
> >
> > Please send comments, errors, suggestions!
> 
> To keep using the current 1.x tree, you need to leave the old
> tinyos-tools in place (i.e., you need to have both versions
> installed). So that means doing
> 
>   rpm -ivh tinyos-tools-1.2....
> 
> rather than
>   rpm -Uvh tinyos-tools...
> 
> Also, files in tinyos-tools-1.2 conflict with files in nesc-1.1. So
> you need to upgrade nesC first.
> 
> David
> 

I added a note to upgrade nesc before installing the tinyos-tools doc.
Also put in an extra column in the table linking to the rpms that
shows the correct rpm arguments (ivh vs Uvh) to use for different
cases.

-kw

_______________________________________________
Tinyos-2.0wg mailing list
Tinyos-2.0wg at Mail.Millennium.Berkeley.EDU
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-2.0wg